AVIP-P5106T-B1F
4K60 2x1 HDMI/USB-C to HDMI AV over IP Transmitter
- Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI (IEEE 802.3ae) compatible SFP+ fiber modules
- 4K@60 Extension up to 120km (maximum distance depends on the SFP+ module and type of fiber used)
- Supports the use of an external control center (IP Master Controller) or control software to provide expanded functionality (Contact your authorized dealer for more information)
- Video preview support when used with the IP Master Controller
- Basic configuration via front panel buttons with an OSD
- IP routable with minimum latency (requires optional IP Master Controller or control software)
- Supports independent breakaway A/V matrix switching with minimum latency, video wall generation, and multi-view compositing (requires optional IP Master Controller/control software)
- Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Bypass modes only)
- Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI or USB-C sources
- Analog stereo audio extension, insertion and extraction (insertion and extraction requires optional IP Master Controller/control software)
- HDMI 2.0 and DVI 1.0 compatible, HDCP 2.2 and HDCP 1.x compliant
AVIP-P5106R-B1F
4K60 HDMI AV over IP Receiver
This Receiver is designed for high-quality, IP-routable AV extension up to 4K@60 4:4:4 with minimum latency. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 120km (Maximum transmission distance depends on the SFP+ modules used). Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB 2.0, and Ethernet. Advanced HDMI content such as HDR (High Dynamic Range), 12-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. When combined with the optional IP Master Controller or control software, the functionality of the receiver expands exponentially. Multiple transmitters and receivers may be combined with one or more 10-Gigabit fiber Ethernet switches, allowing the units to form a distributed video matrix, a multiviewer system, or a video wall system, adding to their flexibility in large event installations. The integrated USB hub of each transmitter can function as a simple point-to-point comprehensive USB over IP functionality extension or be freely routed between any two endpoints. This type of routing flexibility enables a wide range of multi-user, control room, or on-demand installation scenarios. The built-in EDID and HDCP management functionality enables the unit to fit into every situation. Basic configuration of the unit can be achieved via front panel buttons with an OSD (On-Screen Display). Advanced control such as firmware updates can also be performed conveniently through the optional IP Master Controller or control software.
CDPS-CS8-S
AV over IP Master Controller
This 4K60 over 10G IP Master Control is a powerful and flexible solution for controlling multiple SDVoE (Software Defined Video over Ethernet) based extenders within same network. The user only needs to install this unit into the same local network as the extenders (transmitters and receivers) to easily define and configure channel routing selections (including video, audio, and a variety of control interface types) using the WebGUI. Without the use of this centralized control unit, each transmitter and receiver pair would only be able to function in a point-to-point capacity.

